BlazeCutUSA

T-Series

BlazeCut “T” Series system is a simple and cost effective fire protection of small enclosures. The system consists of a heat sensitive tube made of special plastic which is closed by a stainless steel fitting on each end. The tube has both storage and detection function which means that the extinguishing agent is stored directly in the tube and no additional storage device like cylinder is needed.

The BlazeCut system uses HFC-227ea or HFC-236fa, which is an extremely effective, clean and people-safe extinguishing medium.

BlazeCut system operates automatically independent of any power supply by detecting higher temperatures. When the temperature in the protected enclosure rises to a critical threshold, the detection tube melts down at the point where the affecting temperature is the highest. Melting the tube creates a hole releasing the entire extinguishing agent stored in the tube onto the source of the fire.

BlazeCut “T” Series systems are supplied in various lengths of the tube and volumes of agent. The standard volume of agent ranges from 0.55 LB to 2.2 LB, which is sufficient to protect enclosures with volume between 0.25 m3 and 1.00 m3 respectively.

 

HFC Clean Agent

The HFC clean extinguishing agent is liquefied gas used for volume fire suppression. The HFC clean extinguishing agent is discharged as a stream of gas and liquid droplets that penetrate into the fire area, ceasing the combustion process through heat absorption and chemical interaction. The HFC clean extinguishing agent is considered environmentally accepted substitute for Halon extinguishing agents harmful to the ozone layer used in the past.

Main features

  • Electrically non-conductive
  • Non-corrosive
  • Resistant to temperature changes
  • Safe for people
  • Leaves no residue
  • Does not damage equipment, objects or sensitive devices
  • Zero ODP (Ozone Depletion Potential)
Types of HFC clean extinguishing agents used:
HFC-227ea
HFC-236fa

 

Approvals
HFC-227ea: UL recognized and FM Approved
HFC-236fa: UL recognized

Application
The HFC clean extinguishing agent is an agent of choice for protection of enclosures where residue may be harmful to the protected sensitive devices. The agent is suitable for Class A (creating flames), Class B, and Class C.

 

Check out this great video produced by our friends at JOGR!
 And another great visual from our counterparts "Down Under"!