BlazeCut for Devices with Switch End
This switched version of the T series includes an integrated pressure switch at one end. The switch allows use of our accessory panels, sounders, and beacons, or wiring into your custom application.
BlazeCut “T” Series system is a simple and cost effective fire protection of small enclosures. The system consists of a heat sensitive tube made of special plastic which is closed by a stainless steel fitting on each end. The tube has both storage and detection function which means that the extinguishing agent is stored directly in the tube and no additional storage device like a cylinder is required.
BlazeCut for Devices uses HFC-227ea, which is an extremely effective, clean and people-safe extinguishing medium that is UL recognized and FM approved
BlazeCut system operates automatically independent of any power supply by detecting higher temperatures. When the temperature in the protected enclosure rises to a critical threshold of 248*F, the detection tube melts down at the point where the affecting temperature is the highest. Melting the tube creates a hole releasing the entire extinguishing agent stored in the tube onto the source of the fire.
BlazeCut “T” Series systems are supplied in various lengths of the tube and volumes of agent. The standard volume of agent ranges from 0,25 kg to 1,0 kg, which is sufficient to protect enclosures with volume between 0,25 m3 and 1,00 m3 respectively.
BLAZECUT operates automatically without any power supply
Blazecut is A.B,C and Live electrical equipment rated.
The system cannot slowly leak down or lose pressure like a conventional fire extinguisher. If you cannot see an air bubble in the line, the system is empty and should be replaced.
The HFC clean extinguishing agent does not leave a residue, conduct electricity, corrode or cause shock damage. This makes the clean agent solution the right choice for sensitive devices.