BlazeCut T-Series is a flexible, heat sensitive tube that contains HFC-227ea Clean Agent Suppressant. In a fire event, the tube will melt, creating a nozzle to release the suppressant which lowers the temperature drastically, breaking the "fire triangle" eliminating the conditions needed for fire.
BlazeCut T-Series are designed for mostly or fully enclosed spaces. A certain concentration is needed based on the protected area volume and application. Please contact us with the details of your application for assistance. It is essential that the units are appropriately sized for your application.
BlazeCutUSA has a network of dealers and installers across the United States. Please contact us with your needs and we will assist you in finding a retailer.
Yes! please contact us for details on our OEM program. We are happy to develop a suppression solution for your products to increase value and safety.
BlazeCutUSA offers a dealer, retailer, and installer program. If you are considering adding BlazeCut T-Series to your business please contact us with your details to discuss the benefits and possibilities of adding T-Series to your offerings.
BlazeCut T-Series HFC-227ea is a liquified gas and can ship UPS Ground as a Limited Quantity. Expedited Air shipping, or shipping to Hawaii, Alaska, Puerto Rico, Guam, etc is possible with fully documented hazmat paperwork, at an extra expense. If you need T-Series shipped via air please contact us for assistance.
BlazeCut T-Series is a sealed system which cannot slowly lose pressure like a fire extinguisher. The pressure in the tube will change based on ambient temperature. To verify that your T-Series is "good" simply look for an air-bubble in the line. The air bubble indicates that the tube is filled with liquid and is functional. You can also check the gauge when the unit is at operating temperature or warmed up. The gauge alone is not sufficient for inspection, as BlazeCut T-Series is very low pressure when cold and may not display any pressure on the gauge at all when cold.
BlazeCut T-Series has a 2 year warranty. The warranty does not cover errors in installation (kinking the tube, installing too close to a heat source) contact us for questions on installation. A lifespan of up to 10 years can be achieved in non-harsh environments. Please note that this lifespan may be reduced in unstable and harsh environments.
The BlazeCut T-Series does not require any special maintenance. It is recommended to visually inspect the system and its state at operating temperature, between every month and 3 months dependant on the type of environment it has been installed in. During the movement of the tube, bubbles of gas in the extinguishing agent will be visible. This indicates that extinguishing agent is in the tube and the BlazeCut T-series is functional.